How to Remove a PS5 Cover: A Step-by-Step Guide

Knowing how to remove a PS5 cover is important for every PlayStation 5 owner. Whether you want to clean your console, upgrade its parts, or change its look, knowing how to do it safely and correctly is crucial. This guide is for all PS5 users and provides step-by-step instructions for the original model (CFI-1000) and the PS5 Slim (CFI-2000).

Understanding the differences between these two models ensures you follow the correct procedures. Removing the cover allows for maintenance and upgrades and opens up opportunities for personalization with various faceplate colours. Properly handling your console during this process helps maintain its longevity and performance.

Preparation Before Removing the PS5 Cover

Before you begin removing the cover of your PlayStation 5, preparing your console is essential to avoid any damage and ensure a smooth process. Here are some steps to follow:

1. Power Down Your PS5

• Ensure your PS5 is fully powered down. Go to the control center and select the power options to turn off the console.
• Disconnect all cables, including the power cable, HDMI cable, and any connected peripherals.
• Wait a few minutes for the console to cool down if it has been used recently.

2. Clean Your PS5

• Use a microfiber cloth to wipe down the exterior of your PS5. This helps remove dust and debris that could fall into the internal components once the cover is removed.
• Ensure your workspace is clean to avoid introducing new dust particles when opening your console.

3. Identify Your PS5 Model Number

• Locate the model number on the back of your PS5. The launch model (CFI-1000) and the Slim model (CFI-2000) have different cover removal processes.
• Knowing your specific model number ensures you follow the correct instructions tailored for your console type.

These preparatory steps will set you up for an effortless cover removal process while keeping your PlayStation 5 clean and safe from potential damage.

Removing Covers from Different PS5 Models

Removing Covers from the Launch PS5 (CFI-1000)

To remove PS5 faceplates on the launch model, follow these steps for both the top and bottom panels. This guide ensures you handle your console with care and precision.

Top Panel Removal:

1. Position the Console: Place your PS5 horizontally on a flat surface with the PS logo at the top right corner.
2. Grip and Lift: Hold the corner with the PS logo, lift up gently, and slide it to your left.
3. Detach the Panel: The top panel should come off easily after slightly upward movement.

Bottom Panel Removal:

1. Flip the Console: Turn your PS5 over so the power button faces you. If your PS5 has a disc drive, ensure it is also facing toward you.
2. Grip and Lift Again: Grasp the top-left corner of the console, lift it up gently, and slide to your right.
3. Remove the Bottom Panel: The bottom panel will detach similarly to the top panel.

Re-attaching Panels:

1. Align and Slide: To re-attach either cover, align it properly and slide it back into place from right to left.
2. Listen for the Click: You’ll hear a click when the cover is securely in place.

This step-by-step guide helps you remove PS5 faceplates without any tools or screws, making it user-friendly for maintenance, upgrades, or customization purposes.

Removing Covers from a PS5 Slim (CFI-2000)

Removing covers from the PS5 Slim model varies slightly but remains straightforward.

Preparation:

1. Identify Model Number: Ensure that you have a CFI-2000 model by checking the back of your console.
2. Place Console Properly: Position your PS5 Slim on a flat surface with its feet down and front side facing you.

Removing Each Cover Plate:

1. Remove Feet: Detach any feet or stands connected to your console.
2. Identify Symbols: Each cover plate features symbols corresponding to DualSense buttons (X, Square, Circle, Triangle).
3. Grip and Lift Each Cover: Grab each cover from its bottom edge (closest to you), lift up gently away from the console until it detaches from its clips.
4. Pull Toward You: Slightly pull each cover toward you to complete removal.

Re-attaching Plates:

1. Align Clips with Holes: Align each cover’s clips with their respective holes on the PS5 Slim’s front and back sides.
2. Push Until Clicks: Push in until you hear a “click,” indicating secure attachment.

These instructions for removing PS5 faceplates are designed to be clear and concise, ensuring ease of use whether performing maintenance or simply personalizing your console’s appearance.

By following these steps carefully for either model—CFI-1000 or CFI-2000—you can confidently remove and reattach your PS5 covers as needed.

Removing Covers from a PS5 Slim (CFI-2000)

The PS5 Slim (CFI-2000) has a different design from the launch model (CFI-1000). It is slimmer and has an updated method for removing the faceplates. Here’s how to remove the covers from each side of the CFI-2000 model.

Step-by-Step Instructions

1. Prepare Your Console:

• Make sure your console is turned off and unplugged.
• Place it on a flat surface with the feet down and the front facing you.

1. Remove the Feet:

• Carefully take off the feet from the PS5 Slim. This will make it easier to access the covers.

1. Identify Cover Plates:

• The PS5 Slim has four cover plates, each marked with symbols corresponding to the DualSense controller’s action buttons: X, Square, Circle, and Triangle.

1. Remove Each Cover Plate:

• Start with one cover plate at a time.
• Grab a cover from its bottom edge (the side closest to you).
• Lift up gently and pull away from the console. The cover should detach from its clips.
• Pull slightly toward you to completely remove it.

1. Reattach or Replace Covers:

• To reattach, align the cover’s clips with their respective holes on the PS5’s front and back sides.
• Push in until you hear a “click,” indicating that the cover is securely in place.

These instructions will help you safely remove PS5 faceplates, allowing easy cleaning, upgrades, or customization. Whether you’re looking to replace PS5 plates for aesthetic reasons or upgrade your hard drive, understanding these steps ensures a smooth process.

Removing covers from the PS5 Slim model is straightforward once you familiarize yourself with its unique design elements. This knowledge is essential for maintenance tasks like cleaning internal components or swapping out faceplates for new colours.

Cleaning Your PS5 Console After Removing Covers

Maintaining a clean PS5 is crucial for optimal performance. Once the covers are off, follow these best practices to clean internal components:

1. Dust Removal: Use a can of compressed air to blow out dust from the internal areas. Hold the can upright and keep it at a safe distance to avoid moisture build-up.
2. Microfiber Cloths: Wipe down surfaces with a dry microfiber cloth. This material is gentle and effective in trapping dust without scratching components.
3. Isopropyl Alcohol: For tougher grime, dampen a cotton swab or cloth with isopropyl alcohol (at least 90% concentration). Carefully clean around fan blades and other hard-to-reach spots.

Before cleaning, ensure your console is completely powered down and disconnected from all cables. Regular maintenance will extend the life of your PS5 and improve its performance.

Why You Might Want to Remove Your PS5 Cover

Removing your PS5 cover can serve multiple purposes, offering practical or aesthetic benefits. Here are some key reasons:

1. Maintenance Tasks: Over time, dust and debris can accumulate inside your console. Removing the cover can thoroughly clean internal components to ensure optimal performance. This is particularly crucial if you notice your PS5 overheating or making unusual noises.
2. Upgrade PS5 Storage: If you’re running out of storage space, you must remove the cover to upgrade your hard drive. The PS5 supports additional SSDs, allowing you to increase storage capacity and significantly improve load times.
3. Personalization: Swapping out the standard white faceplates for new colour plates can give your console a fresh look that complements your gaming setup.

Exploring Options for Customization with New Color Plates for Your PS5

Sony offers a range of replacement faceplates that allow you to personalize your console. These plates are available in various colours:

• Midnight Black
• Cosmic Red
• Nova Pink
• Starlight Blue
• Galactic Purple

Each color brings a unique aesthetic to your console, letting you match it with other gaming accessories or express your style. Customizing with new color plates is straightforward once you know How to Remove a PS5 Cover, making it an accessible option for most users.

Replacing PS5 panels enhances visual appeal and provides a sense of ownership and uniqueness. Whether you’re aiming for a sleek black setup or a vibrant red splash, these options make it easy to tailor your console’s look.

Understanding how to remove and replace these covers safely opens up numerous possibilities, from practical upgrades to eye-catching customizations.

FAQs (Frequently Asked Questions)

How do I prepare my PS5 for cover removal?

Before removing the PS5 cover, ensure your console is powered down and clean. It’s also important to identify your specific PS5 model number to follow the correct instructions for cover removal.

What are the steps to remove the cover from a PS5 CFI-1000 model?

To remove the cover from the CFI-1000 model, follow detailed instructions that include removing both the top and bottom panels. Ensure you handle each part carefully to avoid damage.

How does removing covers from a PS5 Slim (CFI-2000) differ from the launch model?

The design differences between the launch model (CFI-1000) and Slim model (CFI-2000) affect how covers are removed. The article provides step-by-step instructions specific to both models.

What cleaning methods are recommended after removing the PS5 covers?

Best practices for cleaning internal components include using microfiber cloths and isopropyl alcohol. These materials help ensure that your console remains in optimal condition after the cover is removed.

Why would someone want to remove their PS5 cover?

Reasons for removing the PS5 cover include performing maintenance tasks like cleaning or upgrading the hard drive and personalizing the console with new faceplate colours available in various designs.